The 7" passive radiator PR182BD02 was designed for high performance compact subwoofer applications. Optimized for working with the active 7" subwoofers SW182BD03 and SW182BD04 but will function well with any suitable active subwoofer transducers.
Very rigid black aluminium cone to ensure piston motion at high levels
Rigid die cast alu chassis with extensive venting for lower air flow speed reducing audible distortion
Low-loss suspension (high Qm) for better reproduction of details and dynamics
Conex spider for better durability under extreme conditions
Custom tunable by adding one or more of the three extra weights (included)
NOMINAL SPECIFICATIONS
Notes
Parameter
Before burn-in
After burn-in
Unit
Nominal size
7
[inch.]
Effective radiating area, Sd
131
[sq.cm]
1
Resonance frequency (free air, no baffle), Fs - without additional mass - with additional 10 g mass - with additional 20 g mass - with additional 30 g mass - with additional 40 g mass - with additional 50 g mass - with additional 60 g mass - with additional 70 g mass
36.2 32.2 29.2 26.9 25.1 23.6 22.4 21.3
[Hz]
2
Moving mass, incl. air (free air, no baffle), Mms, without extra weights
37
[g]
1
Suspension compliance, Cms
0.52
[mm/N]
1
Equivalent air volume, Vas
12.7
[lit.]
1
Mechanical Q, Qms - without additional mass - with additional 10 g mass - with additional 20 g mass - with additional 30 g mass - with additional 40 g mass - with additional 50 g mass - with additional 60 g mass - with additional 70 g mass
32.5 36.6 40.3 43.7 46.8 49.8 52.6 55.2
[-]
Maximum cone travel, mechanical limits, Xmax
+/-15
[mm]
Total unit net weight excl. packaging (incl. 3 extra weights)
0.38
[kg]
Note 1
The unit is not burned in before shipping.
Note 2
The moving mass may be increased in 10 g steps up to a maximum of +70 g by adding one or more of the three extra weights that are included with the unit.
OUTLINE DRAWING AND NOMINAL DIMENSIONS (mm)
PACKAGING AND ORDERING INFORMATION
Part no. PR182BD02-01
Individual packaging (one piece per box), incl. 3 separate weights